Fiber resilience alone is not enough.

The fibers also need to remain securely anchored to the backing.

This is where tuft withdrawal force, sometimes called tuft pull-out force, becomes important.

A strong anchoring system helps reduce the risk of:

• Individual tuft loss
• Local thinning
• Fiber displacement
• Edge-related damage
• Progressive surface deterioration

For non-infill turf, backing design is particularly important because there is no loose infill layer helping stabilize the fibers.

When evaluating a product, buyers should therefore look beyond density and ask for independent test data on tuft withdrawal force and aging performance.

---

Proper Installation Can Prevent Premature Flattening

Even a well-engineered artificial turf product can develop premature flattening if installation is poor.

Prepare a Stable and Level Base

The base should be:

• Properly compacted
• Sufficiently level
• Free from sharp debris
• Designed for adequate drainage

For outdoor installations, the exact drainage slope should be determined according to the site and drainage system. A commonly used design range for many outdoor areas is approximately 0.3%–0.6%, although project-specific engineering requirements may differ.

---

Install the Turf Without Excessive Stretching

Artificial turf should be laid flat and tensioned appropriately.

Overstretching the material can create unwanted fiber angles and dimensional stress.

Insufficient tension, meanwhile, can leave:

• Wrinkles
• Waves
• Loose areas

The objective is a stable, flat installation rather than maximum mechanical tension.