Instead of supplying just turf, we provided a complete surfacing system, because ASTM F1292 evaluates the entire structure: turf + shock pad + base layer.
Artificial Grass Layer:
- Model: MS-Play 35
- Pile Height: 35mm
- Yarn: PE monofilament with thatch, soft-touch
- Features: UV-resistant, lead-free, dual-tone green
- Function: Drainage holes for outdoor use
Shock Pad Layer:
- Material: Closed-cell PE foam
- Thickness: 25mm
- Tested for CFH ≥ 6ft under ASTM F1292
- Performance: High rebound, long-lasting cushioning
Base Layer Recommendation:
-
- Crushed stone foundation
- Optional geotextile membrane for added stability
Testing & Verification
The shock pad was certified under ASTM F1292 with lab reports. We supported the client through:
- Reviewing G-max and HIC data
- Simulating on-site installation conditions
- Preparing documents for local safety authorities
Sample Test Values:
- G-max: 132 (Pass – below 200 limit)
- HIC: 824 (Pass – below 1000 limit)
Logistics & Delivery
We arranged DPU shipping (Delivered at Place Unloaded) to the client’s U.S. East Coast warehouse, along with:
- 600 m² of artificial turf rolls
- 600 m² of pre-cut shock pad panels (1m x 2m)
- Turf joint tape, adhesive, and installation guide
- Documentation: MSDS, lead-free certificate, ASTM test reports
Key Takeaways
This project highlighted a few key insights:
- ASTM F1292 compliance is about the entire system, not just the turf
- U.S. buyers require technical assurance and complete documentation The combination of turf + shock pad is crucial for safe playground surfaces
